Scissor aerial work platform vehicle (self-scissor aerial work platform) Self-scissor aerial work platform: It can walk fast and slowly under different height working conditions, and can continuously complete up and down, forward, and forward in the air with a convenient operating platform. Work backwards, steering, etc. Aerospace cartridge valve technology. The platform is equipped with level alarms, balance valves, automatic safety panels and other alarm devices. The operating height can reach 12 meters and the load capacity is 300 kg. The fence can be extended horizontally to greatly expand the operating range. It is suitable for factory workshops, There are high-altitude operations in the square lobby airport, park, etc.
Scissor aerial work platform truck (fixed scissor aerial work platform) fixed scissor aerial work platform: special hydraulic lift products used for transporting goods between building floors are mainly used for various working floors to transport goods up and down; three-dimensional Car lifts between garages and underground garages, etc. The hydraulic system is equipped with anti-falling and overload safety protection devices, and operation buttons can be set on each floor and the work surface of the lifting platform to realize multi-point control.
Scissor aerial work platform VB04040009 platform rated load: 300kg maximum working height: 5000mm maximum platform height: 3000mm machine length: 1180mm machine width: 760mm working platform size: 1170×600mm minimum ground height: 60mm wheelbase: 990mm minimum Turning radius: 1200mm Drive motor: 2×24/0.4V/kw Lifting motor: 24/0.8V/kw Machine driving speed (platform lowering): 4km/h Machine driving speed (platform raising): 0.8km/h rising /Descent speed: 20/30sec Battery: 2×12/80V/Ah Charger: 24/15V/A Maximum climbing capacity: 10-15 Maximum allowable angle of work: 2° Drive wheel: φ230×80mm Front wheel: 6in Machine weight: 490kg Optional platform extension: VB04050008
Scissor aerial work platform VB04040121 platform rated load: 300kg maximum working height: 5900mm maximum platform height: 3900mm machine length: 1180mm machine width: 760mm working platform size: 1170×600mm minimum ground height: 60mm wheelbase: 990mm minimum Turning radius: 1200mm Drive motor: 2×24/0.4V/kw Lifting motor: 24/0.8V/kw Machine driving speed (platform lowering): 4km/h Machine driving speed (platform raising): 0.8km/h rising /Descent speed: 20/30sec Battery: 2×12/80V/Ah Charger: 24/15V/A Maximum climbing capacity: 10-15 Maximum allowable angle of work: 2° Drive wheel: φ230×80mm Front wheel: 6in Machine weight: 600kg Optional platform extension: VB04050008
