In our daily life, we will see some people who live in high-altitude working classes wearing air-tight insulating suits busy in the sky. They use insulating tools to handle large and small aerial work, just like the small ones on the staff. Music notes, however, these electricians lack safety guarantees. Every operation is a new adventure, and every ascent takes life safety as a bargaining chip. The emergence of boom lift parts has obviously become the amulet of many aerial operators.
1. Application of boom lift parts in operation
In the case of bad weather, the construction operation environment is poor. For emergency repair workers, it is often difficult to get on the pole and it is prone to personal accidents. The use of boom lift parts can effectively avoid such accidents and urgent repairs. Operators can safely carry out high-altitude operations through the work platform provided by boom lift parts; when carrying out emergency repair work of distribution lines at night, high-altitude operations should also be completed by boom lift parts, and as far as possible, do not use the method of personnel boarding to perform emergency repairs. To avoid personal injury or death caused by falling at high altitude due to lack of light and unclear vision of workers.
2. Application in the elimination of boom lift parts
In the elimination of power distribution lines, for example, tree pruning should be carried out using boom lift parts. On the one hand, because the operator cannot take effective protective measures during climbing the tree, there is a risk of falling from the height. On the other hand, When the worker climbs the tree, the tools and tools used for pruning are not easy to carry or cause the tools to fall and hurt others or hurt themselves. Even if the tool is used to transfer the tool up and down, there are many branches of the tree, which will cause difficulties in the transfer and affect the operation . Therefore, the use of boom lift parts for tree pruning can effectively avoid such unsafe conditions, and the work efficiency is very high.
3. Application in installing boom lift parts
In the construction of distribution lines, boom can be used when the operator is difficult to install the accessories such as crossarms, fittings, insulators, etc. on the pole tower or the operator may cause unsafe phenomena during the boarding of the pole and cannot take effective measures. Lift parts to complete: when the line is tight, the operator can use the boom lift parts to perform the tight line work due to the poor working environment on the tower and the tight line work is difficult; also use the boom lift parts to perform the wire latitude observation work; use Boom lift parts can also be used to replace the work such as the operator's boarding inspection and other heavy workloads.
