How to do a good job of cleaning the parts of the guide rail elevator
1. Remove the sundries on the surface of the safety lock of the guide rail lift and the wire rope in time. Pay attention to the protective measures of the safety lock to prevent the sundries from entering the safety lock, causing the failure or failure of the safety lock. Prevent the collision of the safety lock during operation. After the operation is completed Do a good job of protection to prevent rain, snow and other sundries from entering the safety lock.
2. The surface of the wire rope should be checked frequently, the dirt attached to the equipment should be cleaned up in time, and the tendency of local defects should be discovered and eliminated in time.
3. The electrical box should be kept clean and free of debris, and tools or other materials should not be put into the box. Protect the electrical box, limit switches and cables from external impact.
4. It is necessary to remove the dirt on the surface of the hoist and the working wire rope of the hoist in time to prevent the entry and exit of the hoist from entering the sundries and damaging the parts inside the machine. Pay attention to check whether there is any abnormal noise or odor, and cover it after operation to prevent the intrusion of rainwater and sundries. Avoid collision during installation, transportation, and use to avoid damage to the casing.
5. Always check the connectors and fasteners, and tighten them in time if they are loose. If there is welding crack or component deformation, please contact the technician for maintenance in time. After the operation, the surface dirt should be cleaned up in time, and attention should be paid to maintaining the surface paint layer. If the paint layer falls off, the paint should be repaired in time to prevent rust.
6. Always check whether the electrical connectors are loose, and if they are loose, tighten them in time. After the work is completed, the switch should be switched off in time, the door of the electrical box should be locked, and the electrical box should be properly covered.
