Contact Us

  • No.602, Building 24, Changsha Zongbu Jidi, No.688, Section 2, Wanjiali South Road, Tongsheng street, Yuhua District, Changsha, Hunan province, China. 410007
  • Sales@hunan-aerial-power.com
  • +8618684738272

The difference between the working height and radius of the straight boom and the crank boom aerial vehicle

May 01, 2021

Aerial work vehicles can generally be divided into three types: straight boom, crank arm, and lifting platform. The lifting platform is straight up and down, and only the operating height is different, and there is no operating radius. Because the different working area of working height is exactly the opposite, why is this? The editor here will give you a detailed explanation.

Because of the particularity of the aerial work vehicle, both types can rotate 360 degrees during operation. When the real boom aerial work vehicle is working, it will go straight up according to the demand when it reaches a certain height. When the working height is higher, the boom rises more. For a long time, its operating radius will become larger and larger under 360-degree rotation. When it rises to the longest, the operating radius is the largest, because it can rely on the lower cylinder to support and adjust the height of the operating arm. This is easy for everyone to understand.

On the contrary, the crank arm type aerial operating vehicle can fully expand the arm at low altitude, and the arm can be rotated at 360 degrees and can be operated at any time in a wide radius area; and as the operating height continues to increase, the arm will also slow down. Slowly set up, the maximum height can form a vertical height of 90 degrees with the car body, so no matter how the bottom rotates, there will be no radius formation, and it rotates upright toward a cylinder.

Now you can easily see: the arm of the straight boom aerial work vehicle is inclined, its height is the height from the ground, but the radius is the horizontal distance between the base of the vehicle body and the working place; the maximum height of the crankshaft aerial work vehicle during operation It is a straight line to the base of the vehicle, and the radius is almost zero. This is the difference between the height and the operating radius of the two aerial platforms.

The working height of the aerial platform is below 30 meters. It is recommended to use the construction electric gondola for high-altitude operations over 30 meters


Send Inquiry