The lifting of the aerial work platform needs to be carried out in strict accordance with the operation process. The following are the aspects that need to be paid attention to:
1. The use of the lifting platform should be equipped with professional operators who have been specially trained, passed the examination, and have a certificate;
2. The operator of the lifting platform should follow the maintenance regulations of the mechanical equipment and start the lifting platform after various inspections and maintenance;
3. Support is an important preparatory work for the operation of the lifting platform. A flat ground should be selected, and it can be used when needed.
Work after the sleepers are cushioned;
4. The operating sequence of the lifting platform is to raise the lower arm first, then the middle arm, and then raise the upper arm later. During the slewing operation of the lifting platform, the lower arm must be lifted
Rotation can only be carried out after raising a certain height, and the rotation should be slow;
5. Operators on the work platform should wear safety belts.
Single ladder operation
1. For a single ladder operation, the angle between the ladder and the ground should be 60-70 degrees.
2. Ladder feet should be placed on a level foundation or equipped with anti-skid devices.
3. The two columns of the ladder should be steadily and firmly resting on the object.
4. When a single ladder is used to go up and down the workbench, it should be one meter higher than the workbench to serve as a handrail.
