At present, aerial work platforms are mainly divided into three categories: scissor aerial work platforms, mast aerial work platforms and boom aerial work platforms.
More and more attention is paid to the safety measures of scissor aerial work platforms. The safety requirements for scissor aerial work platforms: more and more scissor lift trucks are used in factories and construction sites. This new type of scissor aerial work platforms Tools have brought a lot of convenience to our work, but also brought some safety hazards. From the analysis of the current construction of the lifting platform, the focus should be on preventing the lifting truck from overturning, scratching, and electric shock. In daily use, the focus should also be on daily inspections before use, careful monitoring during use, and maintenance after use.
The use process should focus on the following points:
1. There should be a label on the body of the scissor-type aerial work platform, indicating the following: the lifting speed limit of the elevator, the rated load capacity, the maximum lifting height, the name of the manufacturer, and the date of production, etc.
2. Scissor aerial work platform operators must participate in fall protection and lift use training before they can start operating the equipment.
3. The installed lift shall be checked and accepted by the on-site safety engineer before being used, and the license shall be put on it before it can be put into use.
4. The users of the scissor aerial work platform must operate and use in accordance with the operating rules of the lift truck.
5. Personnel using the lift truck must check the lift before using it every day and fill in the checklist.
6. The working area of the scissor aerial work platform must be on open and flat ground, and it is not allowed to run on uneven ground.
7. The legs of the scissor aerial work platform must be fully opened and supported firmly.
8. Personnel using scissor-type aerial work platforms must wear full-body safety belts. During the lifting process, the lift truck attaches the safety belt to the platform, basket or the attachment point made by the manufacturer. When the scissor-type aerial work platform is raised to the working height, the safety belt is no longer tied to other structurally reliable hanging points. If there is no reliable hanging point, a wire rope bolt should be used to hang on the steel beam and the safety belt should be fastened. Hang on the wire rope loop.
9. The working area of the scissor aerial work platform must be maintained with warning tapes, warning signs, and full-time supervisory personnel.
10. When the scissor-type aerial work platform is in the rising position, the operator cannot leave
